Rule-Mate Fully Automated Bilge Pumps by Rule

 

Rule introduces the Rule-Mate Automated series of Bilge Pumps. The rule-mate™ consists of a powerful rule bilge pump and a new non-mercury float switch in a single housing. The pumps are available in several capacities-500 GPH, 750 GPH, 1100 GPH, 1500 GPH and 2000 GPH.

 

While fully automated, the Rule-Mate Bile Pumps will only turn on when the water level rises. There is no cycling and no battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The Rule-Mate's internal computer senses no load (water) against the impeller and then shuts off.

 

A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired.

 

The rule-mate™ bilge pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.

 

 

Weight 5.00 lbs